22 Break Down - In 2012 Ruger announced the 10/22 Takedown version of the highly regarded Ruger 10/22 rifle. The 10/22 Takedown is the receiver version of the 10/22, designed to break the rifle down into two parts: receiver + stock and barrel + fore for easy carrying in a small backpack or bag.
In terms of potential use, the Ruger 10/22 Takedown looked like an interesting rifle, but at first it didn't satisfy my gun needs. Five years later, at SHOT Show 2017, Magpul introduced several accessories for the Ruger 10/22 Takedown, most notably the X-22 Backpacker.
22 Break Down
The Magpul X-22 Backpacker Stock is an easy "drop-in" replacement for the Ruger 10/22 Takedown with a more compact, cleaner and neater transport design. After seeing the stock X-22 Backpacker in person, it made me reconsider the 10/22 Takedown as an inexpensive field/survival rifle.
Ruger K 10/22 Rbpbtc 22lr 47cm Pipe
The X-22 Backpacker style rifle is a nifty, handy, portable field/survival rifle that I can toss in the back of a jeep or truck when I'm on an adventure.
I've been researching Ruger 10/22 Takedown rifle options for a few months to see what's worth it. But then I found out that Tactical Solutions has their own 10/22 Takedown receiver and barrel, so I'm thinking about getting a Tactical Solutions rifle, or at least a Ruger 10/22 Takedown and going to swap it out for a TacSol. Aftermarket barrel .
Then a few months ago I got an email. Letter from Brownells promoting their new Brownells BRN-22T and BRN-22TR 10/22 Takedown Receivers.
Email this letter for a promotional price of $129.99 (was $149.99), so it looks like a lot of fun. Buying and assembling a receiver is usually *not* the cheapest way to go about any project, but I find that just assembling the receiver gives me the most satisfaction when completing a new project. Building from scratch is more fun (at least for me) than buying an entire rifle, taking it apart and replacing parts.
Promag Aa Quick Break Down Stock, Black
I chose the BRN-22TR instead of the BRN-22T for picatinny rails. The BRN-22T is a flat top type. The Brownells 10/22 Takedown Receiver is just a receiver but comes with a pre-installed barrel liner and clip mechanism so it can "take over" any Takedown barrel. Although the BRN-22TR has a single action bolt.
The BRN-22TR has a hole in the rear for cleaning the barrel with a cleaning rod, but this is controversial since the barrel is designed to be removable. This is actually a desirable feature of a standard 10/22 rifle, since the barrel is usually fixed and not something you want to take off frequently for cleaning.
However, with the 10/22 Takedown, the rear cleaning rod hole is unnecessary, especially if you have to remove the rifle from the stock to access the cleaning rod hole.
With the receiver in hand, I had to assess what was needed to build the rifle. The general parts list for this rifle includes:
M6 Takedown Rifle Information Page
Almost all of the 10/22 receiver parts are carried over to the 10/22 Takedown receiver, so there are no special receiver/action parts specific to the 10/22 Takedown other than the barrel clamp mechanism that is already preinstalled.
My goal for this build is a survival style rifle. Small and portable thing that can be used outdoors. Obviously you won't be using it for medium to large games, but the varmints can be removed if needed. It will also be a fun recreational weapon to carry around.
I don't really have the budget for this build, but when I'm shopping for the parts, there really isn't much to discuss other than the two areas I'll cover after the parts list. But here's the actual initial build list:
NOTE: The BRN-22TR receiver has a live bolt and the Tactical Solutions X-ring removal barrel has a backup bolt.
Ruger 10/22 Takedown Magpul Backpacker Stock 1.2 6x24 Scope
The barrel is arguably the most important part of any rifle, and when I decided to build this 10/22 Takedown rifle I kept the Tactical Solutions X-Ring Takedown Bull barrel in mind. Admittedly, much of this is due to the aesthetics of the barrel with its flutes and iron sights.
The accuracy reports are the same as the aftermarket 10/22 barrels, so there's no reason not to go that route.
Another thing to discuss is triggers. At first, I just wanted to buy a Ruger OEM trigger (Ruger B-2C) and modify it with a set of Volquartsen trigger parts to make it easier to use (eg, automatic bolt release, extended magazine release, etc.). The Volquartsen trigger kit is the most economical factory OEM 10/22 trigger kit I did on my regular 10/22 years ago. But I looked at aftermarket flip flops and decided to try the KIDD single stage flip flops since I've never had one. I considered Volquartsen and Timney 10/22 flip flops but went back to KIDD because I actually wanted one for my original 10/22 but never did. Of course, KIDD is highly regarded in the 10/22 community.
I chose to have the single stage preset at the factory at 1.5 lbs and include a long magazine release lever.
My Tuf22 Is Evolving
Bolts are where I get huge bargains when I use Ruger OEM full bolts. To be honest, I'm a bit disappointed with the bolt because it looks rough and from Midway, USA.
The bolts are tight, but look dirty. Not sure if that's because Ruger grinds them up, test shoots and packs them all at once. It almost looks like the original oxidation on the surface of the screw, but it just looks like brown oil stains, and there are orange paint marks on the screw. Everything cleaned up fine, but I'm a bit disappointed with the screw.
Note: I ordered the KIDD bolt after testing the rifle, I thought I'd like to replace the OEM bolt to make the rifle completely non-Ruger, but I've been told through social media that the KIDD bolt won't fit the Brownells BRN. -22 TR. I checked out the Brownells BRN-22T/BRN-22TR product page and noticed this excerpt at the bottom:
The BRN-22 receiver is designed for use with Ruger® 10/22® OEM bolts and may not fit all aftermarket bolts. https://www.brownells.com/rifle-parts/receiver-parts/receivers/rifles-receivers/brn-22-takedown-stripped-receiver-for-ruger-10-22–prod124104.aspx
Savage Model 4c .22 S.l.lr Rifle
In addition to the Ruger OEM bolts, I opted to use OEM Ruger 10/22 watch grips, guides and recoil springs.
Note that I installed Volquartsen Exact Edge pullers on the OEM bolts. The Exact Edge extractor is a common upgrade on 10/22 rifles to improve upon the original 10/22 extractor, which can fail when the rifle starts to get dirty. Aftermarket "enhanced" extractors are considered a must as .22LR rimfire ammo tends to stick to the bolt surface due to the wax in it.
The Magpul X-22 Backpacker Stock was the driving force behind my desire to buy/build a 10/22 Takedown rifle. I just love how the disassembled rifle stays in one piece.
It was very easy to put all the pieces together. Assemble the 10/22 remover from the above parts using only a hex driver, wrench/limiter and a very small screwdriver or hole punch (for disassembly). Unlike the AR-15, you don't need clips, clamp blocks, etc.
Magpul X 22 Backpacker Stock
Installing the bolt and spring assembly with the trigger set is a simple 10/22 (standard or disassembled).
20 in-lb is the 20 in-lb value spread around the internet for action bolts, so I used my trusty Fix It Sticks to thread the X-22 front bolts to the receiver and screw the X-22 front To the barrel. Jam.
Being new to the 10/22 Takedown platform, I had to download the Ruger 10/22 Takedown owner's manual to learn how to properly mount the barrel to the receiver and make the necessary fit settings. But it's really an easy process.
It should be noted that the barrel adjustment knob must be adjusted without the fork attached. This is to ensure that the fork does not interfere with the barrel adjustment, assuming the fork does not properly clear the stock with the proper clearance. Since this rifle is made from parts from multiple manufacturers, this is something to consider.
Ruger 10/22 Stainless Take Down .22lr Semi Auto Rifle
However, once the barrel is adjusted, even with the fork unscrewed, there is still a gap between the base and the fork, so it cannot interfere with the fit.
The rifle weighs 4.0 pounds (without optics) but comes with three empty magazines.
I didn't know what I wanted to do when I built this rifle
Break down cover, break down repair, engine break down, break down boxes, aa break down cover, break down insurance, truck break down, break down cardboard boxes, rac break down, break down, aa break down, plastic break down
0 Comments